 # Перевод mmscfd в м3

Содержание

## Gas Flows Units Conversion Calculator

The gas flow (transport) units converter.

## Choose a flow To unit :

Automatic calculator and gas flow units conversion relative to transit of gasses via gas pipes and Natural Gas Pipelines from common areas/countries like in America, Asia, Middle East or elsewhere. Where the densities of the gas are measured at a specific Standard temperature and Standard pressure. The tool instantly converts a value of each gas flows rate quantity measurement into equivalent gas flow units alternative. Individual flow rate and flow by mass unit to unit menus.
You may enter whole numbers, decimals or fractions ie: 7, 29.35, 15 3/4.
The equation for manual calculations can be found at the bottom of this page.

## Definition of the gas flow units used

MMSCFDMillion standard cubic feet of gas per day — a common volume of gas measure (unit abbreviation MMscf)
SCFDStandard cubic feet per day (gas)
SCFMStandard cubic feet per minute (gas)
Sm^3/hrStandard cubic metre per hour defined at 15 deg. C — 59°F — for US
Nm^3/hrNormal cubic metre per hour defined at zero deg. C — 32°F — for countries using SI metric system of units
MSm^3/dMega Standard Cubic Metres per day defined at 15 deg. Celsius — 59° Fahrenheit — outside of US
MMBtuOne Million British thermal units — pricing unit for gas energy. 1,000,000 Btu ≡ 1 MMBtu ≡ 1.054615 GJ

## MMBtu for natural gas

Traditionally the MMBtu is used in pricing of natural gas. E.g. USD\$X/MMBtu (1 MMBtu = X USD\$).

On average one standard cubic foot of natural gas yields 1,040 Btu (calculated between low 1,010 Btu and high 1,070 Btu — depends on its composition when the gas is burned.) No universal gas volume-to-energy conversion factor has been established because a high/low heating value (gas energy content) comes down to the gas quality.

Yielding approximation: 1,000 ft^3 = 1.04 MMBtu = 1.0967996 GJ

1 million cubic feet of natural gas per day equals 1,040 MMBtu/day.

## Gas flow rate by cubic volume and motion velocity conversions

 gas flows volume/time vs. units transport quantities: Gas Flow units values & equals Million std. cubic feet per day (gas) MMSCFD Std. cubic feet of gas per minute SCFM Std. cubic metre per hour @ 15 deg. C Sm 3 /h Normal cubic metre per hour @ 0 deg. C Nm 3 /h Million standard cubic feet of gas per day MMSCFD = 1 MMSCFD 694.44 SCFM 1,177.17 Sm³/h 1,115.89 Nm³/h Standard cubic feet per minute (gas) SCFM 0.001 44 MMSCFD = 1 SCFM 1.695 128 149 Sm³/h 1.606 886 184 Nm³/h Standard cubic metre per hour at 15 deg. C Sm 3 /hr 0.000 849 493 MMSCFD 0.589 925 901 SCFM = 1 Sm³/h 0.947 943 779 Nm³/h Normal cubic metre per hour at 0 deg. C Nm 3 /hr 0.000 896 143 MMSCFD 0.622 321 612 SCFM 1.054 914 882 Sm³/h = 1 Nm³/h Mega Standard Cubic Metres per day at 15 deg. C MSm 3 /hr 35.395 554 037 MMSCFD 24,580.245 859 2 SCFM 41,666.666 666 667 Sm³/h 39,497.657 470 068 Nm³/h

## MMSCFD to Sm 3 /h is calculated as:

Sm^3/hr of gas equals =

 MMSCFD * 1,000,000 * 288.15 24 * 35.3147 * 288.81

### Where:

288.15 = 15°C expressed in Kelvin (see below)

288.81 = 60°F expressed in Kelvin

24 = hours per day gas flow time

35.3147 = ft 3 per m 3

## MMSCFD to Nm 3 /h is calculated as:

Nm^3/hr of gas equals =

 MMSCFD * 1,000,000 * 273.15 24 * 35.3147 * 288.81

### Where:

273.15 = 0°C expressed in Kelvin (see below)

288.81 = 60°F expressed in Kelvin

24 = hours per day gas flow time

35.3147 = ft 3 per m 3

## Constants for the actual gas flow calculation

Volume ratio — 35.3147

0 degrees Celsius in K — 273.15

15 degrees Celsius in K — 288.15

59 degrees Fahrenheit in K — 288.81

Ratio 60F/15°C — 0.997,714,761

Ratio 60F/0°C — 0.945,777,501

Please note that some numbers in these mathematical examples are rounded. Whilst the actual converter uses complete numbers for the correct calculated output.

### Further explaining the calculation

The S and N letter obviously refers to the gas condition (standard and normal). Both conditions are at atmospheric pressure (1 atm or 101.325 kPa) with standard referring to 15ºC and normal to 0ºC gas temperature. Firstly when comparing a gas at the same pressures and at different temperatures, the density increases as the temperature decreases. Therefore a certain mass of gas will have a smaller volume at normal conditions as apposed to standard conditions.

Now, 1 ft3 = 0.0283168 m3, 1 sft3 = 0.0283168 sm3 and 1 nft3 = 0.0283168 nm3. So, lets look at an example:

A gas well produces natural gas at a flow rate of 140 000 SCFD (standard cubic feet per day) at a stable state:

140 000 SCFD = 3964.352 sm3/day = 165.18 sm3/hr (this online gas flow converter gives very accurate sm3/hr readings, and for other gas transfer units it contains — without rounding errors.)

Now, using the equation PV=nRT for the both states, knowing that the P, n and R remains constant the equation can be written as follows:

V1 / V2 = T1 / T2
V1 = V2 x T1 / T2

Assuming condition 1 is at standard conditions (15ºC, 288.15K), and condition 2 is at normal conditions (0ºC, 273.15K), the gas volume based flow rate can be converted as follows:

If you would like to link to this gas-flows units converter tool, please highlight > cut > paste the following code into your web page. The wording outcome on your site will appear as: Converter of gas flow units

I’ve done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.

Источник

## Amount: 1 Million standard cubic feet of gas per day (MMSCFD at 15°C) of gas flow Equals: 1,177.17 cubic meters per hour (m3/h) in flow rate

Converting Million standard cubic feet of gas per day to cubic meters per hour value in the flow rate units scale.

CONVERT : between other flow rate measuring units — complete list.

How many cubic meters per hour are in 1 Million standard cubic feet of gas per day? The answer is: 1 MMSCFD at 15°C equals 1,177.17 m3/h

## 1,177.17 m3/h is converted to 1 of what?

The cubic meters per hour unit number 1,177.17 m3/h converts to 1 MMSCFD at 15°C, one Million standard cubic feet of gas per day. It is the EQUAL gas flow value of 1 Million standard cubic feet of gas per day but in the cubic meters per hour flow rate unit alternative.

 MMSCFD at 15°C/m3/h flow rate conversion result From Symbol Equals Result Symbol 1 MMSCFD at 15°C = 1,177.17 m3/h

## Conversion chart — Million standard cu-ft in gas per day to cubic meters per hour

1 Million standard cubic feet of gas per day to cubic meters per hour = 1,177.17 m3/h

2 Million standard cu-ft in gas per day to cubic meters per hour = 2,354.34 m3/h

3 Million standard cu-ft in gas per day to cubic meters per hour = 3,531.52 m3/h

4 Million standard cu-ft in gas per day to cubic meters per hour = 4,708.69 m3/h

5 Million standard cu-ft in gas per day to cubic meters per hour = 5,885.86 m3/h

6 Million standard cu-ft in gas per day to cubic meters per hour = 7,063.03 m3/h

7 Million standard cu-ft in gas per day to cubic meters per hour = 8,240.21 m3/h

8 Million standard cu-ft in gas per day to cubic meters per hour = 9,417.38 m3/h

9 Million standard cu-ft in gas per day to cubic meters per hour = 10,594.55 m3/h

10 Million standard cu-ft in gas per day to cubic meters per hour = 11,771.72 m3/h

11 Million standard cu-ft in gas per day to cubic meters per hour = 12,948.90 m3/h

12 Million standard cu-ft in gas per day to cubic meters per hour = 14,126.07 m3/h

13 Million standard cu-ft in gas per day to cubic meters per hour = 15,303.24 m3/h

14 Million standard cu-ft in gas per day to cubic meters per hour = 16,480.41 m3/h

15 Million standard cu-ft in gas per day to cubic meters per hour = 17,657.58 m3/h

Convert flow rate of Million standard cubic feet of gas per day (MMSCFD at 15°C) and cubic meters per hour (m3/h) units in reverse from cubic meters per hour into Million standard cu-ft in gas per day.

## Flow rate. Gas & Liquids.

This unit-to-unit calculator is based on conversion for one pair of two flow rate units. For a whole set of multiple units for volume and mass flow on one page, try the Multi-Unit converter tool which has built in all flowing rate unit-variations. Page with flow rate by mass unit pairs exchange.

## Converter type: flow rate units

First unit: Million standard cubic feet of gas per day (MMSCFD at 15°C) is used for measuring gas flow.
Second: cubic meter per hour (m3/h) is unit of flow rate.

QUESTION:
15 MMSCFD at 15°C = ? m3/h

15 MMSCFD at 15°C = 17,657.58 m3/h

Abbreviation, or prefix, for Million standard cubic feet of gas per day is:
MMSCFD at 15°C
Abbreviation for cubic meter per hour is:
m3/h

## Other applications for this flow rate calculator .

With the above mentioned two-units calculating service it provides, this flow rate converter proved to be useful also as a teaching tool:
1. in practicing Million standard cu-ft in gas per day and cubic meters per hour ( MMSCFD at 15°C vs. m3/h ) measures exchange.
2. for conversion factors between unit pairs.
3. work with flow rate’s values and properties.

## Calculators

To link to this flow rate Million standard cubic feet of gas per day to cubic meters per hour online converter simply cut and paste the following.
The link to this tool will appear as: flow rate from Million standard cubic feet of gas per day (MMSCFD at 15°C) to cubic meters per hour (m3/h) conversion.

I’ve done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.

Источник

## Amount: 1 cubic meter per hour (m3/h) of flow rate Equals: 0.00085 Million standard cu-ft in gas per day (MMSCFD at 15°C) in gas flow

Converting cubic meter per hour to Million standard cu-ft in gas per day value in the flow rate units scale.

CONVERT : between other flow rate measuring units — complete list.

How many Million standard cu-ft in gas per day are in 1 cubic meter per hour? The answer is: 1 m3/h equals 0.00085 MMSCFD at 15°C

## 0.00085 MMSCFD at 15°C is converted to 1 of what?

The Million standard cu-ft in gas per day unit number 0.00085 MMSCFD at 15°C converts to 1 m3/h, one cubic meter per hour. It is the EQUAL flow rate value of 1 cubic meter per hour but in the Million standard cu-ft in gas per day gas flow unit alternative.

 m3/h/MMSCFD at 15°C flow rate conversion result From Symbol Equals Result Symbol 1 m3/h = 0.00085 MMSCFD at 15°C

## Conversion chart — cubic meters per hour to Million standard cu-ft in gas per day

1 cubic meter per hour to Million standard cu-ft in gas per day = 0.00085 MMSCFD at 15°C

2 cubic meters per hour to Million standard cu-ft in gas per day = 0.0017 MMSCFD at 15°C

3 cubic meters per hour to Million standard cu-ft in gas per day = 0.0025 MMSCFD at 15°C

4 cubic meters per hour to Million standard cu-ft in gas per day = 0.0034 MMSCFD at 15°C

5 cubic meters per hour to Million standard cu-ft in gas per day = 0.0042 MMSCFD at 15°C

6 cubic meters per hour to Million standard cu-ft in gas per day = 0.0051 MMSCFD at 15°C

7 cubic meters per hour to Million standard cu-ft in gas per day = 0.0059 MMSCFD at 15°C

8 cubic meters per hour to Million standard cu-ft in gas per day = 0.0068 MMSCFD at 15°C

9 cubic meters per hour to Million standard cu-ft in gas per day = 0.0076 MMSCFD at 15°C

10 cubic meters per hour to Million standard cu-ft in gas per day = 0.0085 MMSCFD at 15°C

11 cubic meters per hour to Million standard cu-ft in gas per day = 0.0093 MMSCFD at 15°C

12 cubic meters per hour to Million standard cu-ft in gas per day = 0.010 MMSCFD at 15°C

13 cubic meters per hour to Million standard cu-ft in gas per day = 0.011 MMSCFD at 15°C

14 cubic meters per hour to Million standard cu-ft in gas per day = 0.012 MMSCFD at 15°C

15 cubic meters per hour to Million standard cu-ft in gas per day = 0.013 MMSCFD at 15°C

Convert flow rate of cubic meter per hour (m3/h) and Million standard cu-ft in gas per day (MMSCFD at 15°C) units in reverse from Million standard cu-ft in gas per day into cubic meters per hour.

## Flow rate. Gas & Liquids.

This unit-to-unit calculator is based on conversion for one pair of two flow rate units. For a whole set of multiple units for volume and mass flow on one page, try the Multi-Unit converter tool which has built in all flowing rate unit-variations. Page with flow rate by mass unit pairs exchange.

## Converter type: flow rate units

First unit: cubic meter per hour (m3/h) is used for measuring flow rate.
Second: Million standard cubic feet of gas per day (MMSCFD at 15°C) is unit of gas flow.

QUESTION:
15 m3/h = ? MMSCFD at 15°C

15 m3/h = 0.013 MMSCFD at 15°C

Abbreviation, or prefix, for cubic meter per hour is:
m3/h
Abbreviation for Million standard cubic feet of gas per day is:
MMSCFD at 15°C

## Other applications for this flow rate calculator .

With the above mentioned two-units calculating service it provides, this flow rate converter proved to be useful also as a teaching tool:
1. in practicing cubic meters per hour and Million standard cu-ft in gas per day ( m3/h vs. MMSCFD at 15°C ) measures exchange.
2. for conversion factors between unit pairs.
3. work with flow rate’s values and properties.

## Calculators

To link to this flow rate cubic meter per hour to Million standard cu-ft in gas per day online converter simply cut and paste the following.
The link to this tool will appear as: flow rate from cubic meter per hour (m3/h) to Million standard cu-ft in gas per day (MMSCFD at 15°C) conversion.

I’ve done my best to build this site for you- Please send feedback to let me know how you enjoyed visiting.

Источник

Поделиться с друзьями  